当前位置：首页 > news >正文

织梦电影网站模板下载网站在线优化检测

news 2025/8/21 2:11:27

织梦电影网站模板下载,网站在线优化检测,网站搭建教程零基础,松江网站建设公司怎么样NOTE：此篇文章由笔者的 VSCode编辑GCC for ARM交叉编译工具链Makefile构建OpenOCD调试（基于STM32的标准库）派生而来。 1.下载USB Dirver Tool.exe，选择J-Link dirver，替换成WinUSB驱动。（⭐USB Dirver Tool…

NOTE：此篇文章由笔者的 VSCode编辑+GCC for ARM交叉编译工具链+Makefile构建+OpenOCD调试（基于STM32的标准库）派生而来。

1.下载USB Dirver Tool.exe，选择J-Link dirver，替换成WinUSB驱动。（⭐USB Dirver Tool工具可将J-Link从WinUSB驱动恢复为默认驱动⭐）

下载链接
①官方网址：https://visualgdb.com/UsbDriverTool/
②笔者的CSDN链接：https://download.csdn.net/download/ZZLLLLLLZ/89902055

在这里插入图片描述
2.打开安装好OpenOCD路径的interface接口脚本文件夹，比如笔者安装OpenOCD路径的interface接口脚本文件夹如下：

D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\interface

3.复制新的一份jlink.cfg，并重命名为jlink-swd.cfg。
在这里插入图片描述
4.打开jlink-swd.cfg文件，在jlink-swd.cfg的 adapter driver jlink 语句下方添加 transport select swd，如下图所示：

5.将task.json中的 -f interface处后面的接口文件名修改成上述的jlink-swd.cfg，如下图所示：

task.json文件内容：

 //J-link方式下载{"type": "shell","label": "flash with J-link","command": "openocd","args": ["-f","interface/jlink-swd.cfg", //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\interface"-f","target/stm32f4x.cfg", //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\target"-c",// "program build/F401CCU6_demo.elf verify reset exit""program build/${workspaceRootFolderName}.elf verify reset", //将工程根目录名称作为可执行文件名称"-c","reset run",// "-c",// "shutdown","-c","exit"], /*command+args相当于主命令+子命令，也就是openocd -f interface/stlink-v2.cfg -f target/stm32f1x.cfg -c "program build/F401CCU6_demo.elf verify reset exit"的效果*/"problemMatcher": ["$gcc"],"group": "build","dependsOn": [ //每次执行这个任务，会先build任务，这便是所谓的依赖。"build"]}

同理将launch.json中的J-link调试段的 interface 处后面的接口文件名修改成上述的jlink-swd.cfg，如下图所示：
在这里插入图片描述

launch.json文件内容：

//调试脚本
{"configurations": [{"name": "Debug with CMSIS-DAP-link","cwd": "${workspaceRoot}",// "executable": "./build/F401CCU6_demo.elf","executable": "./build/${workspaceRootFolderName}.elf", //将工程根目录名称作为可执行文件名称"request": "launch","type": "cortex-debug","servertype": "openocd","device": "STM32F401CCU6","configFiles": ["interface/cmsis-dap.cfg", //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\interface"target/stm32f4x.cfg" //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\target],"svdFile": "./STM32F401.svd", //选择寄存器文件"liveWatch": { //变量窗口激活和设置每秒的采样次数"enabled": true,"samplesPerSecond": 4},"searchDir": [],"runToEntryPoint": "main","showDevDebugOutput": "none","preLaunchTask": "flash with cmsis-dap-link"//每次调试之前,会先下载程序再调试},{"name": "Debug with ST-link","cwd": "${workspaceRoot}",// "executable": "./build/F401CCU6_demo.elf","executable": "./build/${workspaceRootFolderName}.elf", //将工程根目录名称作为可执行文件名称"request": "launch","type": "cortex-debug","servertype": "openocd","device": "STM32F401CCU6","configFiles": ["interface/stlink.cfg", //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\interface"target/stm32f4x.cfg" //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\target],"svdFile": "./STM32F401.svd", //选择寄存器文件"liveWatch": { //变量窗口激活和设置每秒的采样次数"enabled": true,"samplesPerSecond": 4},"searchDir": [],"runToEntryPoint": "main","showDevDebugOutput": "none","preLaunchTask": "flash with stlink" //每次调试之前会先下载再调试},{"name": "Debug with J-link","cwd": "${workspaceRoot}","executable": "./build/${workspaceRootFolderName}.elf","request": "launch","type": "cortex-debug","servertype": "openocd", //要选择的GDB server"device": "STM32F401CCU6","configFiles": ["interface/jlink-swd.cfg", //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\interface"target/stm32f4x.cfg" //D:\Software\embedded_dev_tools\xpack-openocd-0.12.0-3\openocd\scripts\target],"interface": "swd","svdFile": "./STM32F401.svd","liveWatch": {"enabled": true,"samplesPerSecond": 4},"runToEntryPoint": "main","showDevDebugTimestamps": true,// "preLaunchTask": "build","showDevDebugOutput": "none","preLaunchTask": "flash with J-link" //每次调试之前会先下载再调试}],"version": "2.0.0"
}